Your location ： Home > News > Industry Dynamics

What are the mechanical properties of elliptical flat tubes

Source：www.sdsucheng.cn Release date： 2025-09-29

Information summary：The core mechanical characteristics of elliptical flat tubes are their excellent compressive/torsional strength and lightweight advantages. Their non-circular cross-section design makes them significantly different from traditional circular tubes and ordinary square tubes in terms of stress performance and structural adaptability.

The core mechanical characteristics of elliptical flat tubes are their excellent compressive/torsional strength and lightweight advantages. Their non-circular cross-section design makes them significantly different from traditional circular tubes and ordinary square tubes in terms of stress performance and structural adaptability.
1. Performance of core mechanical properties
The cross-sectional shape of an elliptical flat tube directly determines its mechanical properties, mainly reflected in the following three aspects:
High compressive strength: The elliptical cross-section arc-shaped structure can disperse external pressure. Compared with circular pipes of the same material and weight, it is less likely to have local depressions when subjected to vertical or lateral compression, making it suitable as a load-bearing structure (such as brackets, frames).
Balanced torsional performance: The "flat shape" feature of the flat tube makes its cross-sectional moment of inertia distribution more reasonable when subjected to torsional forces, and its torsional stiffness is better than that of ordinary square tubes, especially suitable for scenarios that require a certain amount of torsional force (such as mechanical transmission components and connectors).
Strong adaptability to bending performance: The bending ability along the long axis of the ellipse is stronger. By adjusting the ratio of the long axis to the short axis, the bending performance in a specific direction can be optimized to meet the stress requirements in different scenarios (such as unidirectional support structures).
2. Performance influencing factors
The mechanical properties of elliptical flat tubes are not fixed and are affected by material, cross-sectional parameters, and processing technology. Therefore, it is necessary to choose based on actual needs:
Material differences:
Aluminum alloy elliptical flat tube: lightweight (density about 2.7g/cm 3), strong corrosion resistance, but low tensile strength (about 100-300MPa), suitable for lightweight and low load bearing scenarios.
Carbon steel elliptical flat tube: high tensile strength (about 300-600MPa), strong load-bearing capacity, but heavy and prone to rust, requiring anti-corrosion treatment, suitable for heavy-duty structures.
Stainless steel elliptical flat tube: balancing corrosion resistance and moderate strength (about 200-500MPa), suitable for humid and corrosive environments (such as outdoor and chemical scenes).
Section parameters: The major axis length, minor axis length, and pipe wall thickness of an ellipse directly affect performance. For example, the thicker the pipe wall, the higher the compressive/bending strength; The larger the ratio of the long axis to the short axis, the more obvious the advantage of unidirectional force.
Processing technology: Elliptical flat tubes formed by cold drawing have higher strength than those formed by hot extrusion due to the refinement of metal internal grains, but the cost is also relatively higher.
3. Performance adaptation for typical application scenarios
Its mechanical properties make it suitable for scenario requirements in multiple industries:
Construction industry: used for curtain wall support and guardrail skeleton, utilizing its lightweight and high compressive strength to reduce the overall load of the building, while improving the aesthetics of the curved section.
Transportation industry: In car frames and bicycle frames, optimizing the cross-sectional ratio, balancing torsional strength and weight, and reducing energy consumption; In ship guardrails, stainless steel material is selected to balance corrosion resistance and impact resistance.
Mechanical manufacturing industry: As the casing and equipment support of transmission components, utilizing their anti torsion and anti bending properties ensures the structural stability of machinery during operation and avoids deformation caused by vibration.

Previous What are the characteristics of square tubes

Next Application of high-strength and high thermal con…